TELTONIKA FM 1010

 

Teltonika FM 1010 is a vehicle telematics unit that easily plugs into a vehicleís OBDII port of almost any car. Itís the first OBDII tracker of Teltonika. It canít read telemetry data from vehicle diagnostic system, but controls ignition status in various ways and detects harsh driving. The possible applications for FM 1010 are Fleet and mobile workforce management, Usage Based Insurance, Car Rental, and Teenage driver tracking.

GSM:
  1. Quad-band 900/1800 MHz; 850/1900 MHz
  2. GPRS class 10 (up to 85,6 kbps);
  3. SMS (text/data)

 

GPS/GLONASS:
  1. NMEA protocol compatible. Messages: GGA, GGL, GSA, GSV, RMC, VTG, TXT
  2. 32 channel GPS/GLONASS receiver
  3. Up to -161 dBm sensitivity

 

Interface:
  1. 1 Digital Input Reserved for Ignition Status Monitoring (depends on vehicle type)
  2. Accelerometer
  3. Power supply (+10Ö+16) VDC
  4. Integrated back-up battery (optional)
  5. Internal High  Gain GSM antenna
  6. Internal High  Gain GPS/GLONASS antenna
  7. Dimensions: L(50,7mm)xW(49,6mm)xH(25mm)
  8. 2 Status LEDs
  9. USB Port
  10. Configuration and firmware upload (FOTA and via USB cable)

 

Features:
  1. Plug and Track
  2. Small and easy to mount case – directly to car OBDII connector
  3. Internal GSM antenna and Internal GPS/GLONASS antenna allow mount FM1010 much easier
  4. Real Time tracking
  5. Smart algorithm of data acquisition (time, distance, angle, ignition and event based)
  6. Sending acquired data via GPRS (TCP/IP and UDP/IP protocols)
  7. Smart algorithm of GPRS connections (GPRS traffic saving)
  8. Operating in roaming networks (preferred GSM providers list)
  9. Events on I/O detection and sending via GPRS or SMS.
  10. Scheduled 24 coordinates SMS sending when GPRS not available
  11. 5 geofence zones (rectangular or circle)
  12. Deep Sleep mode (less than 2  mA power  consumption)
  13. FOTA (firmware updating via GPRS)
  14. 3  operational  modes (Home,  Roaming,  Unknown)  based  on  operator
  15. Integrated  scenarios:
    1. Over  speeding  to  secure  driver  and  prevent  penalties
    2. Trip  start  and  end  detection


  16. FM1010  supports  remote  diagnostic  logs  functionality  using  GPRS.  Possible  issues  resolving  becomes faster .  Manufacturer  can  read  logs  remotely  using  SMS/GPRS  to  diagnose  the  FM1010  and  timely respond  to  the  fault.